Non Corrosion Car Tyre Sealant And Inflator To Prevent Unexpected
Sizes available: 125ml; 250ml;300ml; 450ml; 650ml
Repair your punctured tire with Rubber Patch
Non-toxic and odorless
I-Like Tire Sealer & Inflator is designed to quickly seek-out
and effectively seal most normal punctures and slow leaks. It is
100% applicable to breach within 6mm on tubeless rubber tyres of
cars, motorcycles, electrical bicycles. No jack nor tyre-change is
needed. One step procedure of tyre pumping and repairing is
finished in seconds. It can also be filled into new tyres to
prevent unexpected leakage. Non-toxic and odorless. No corrosion
and no damage to the tire.
1. If possible remove object causing puncture.
2. Deflate the tyre; Shake the can well before use;
3. Screw connecting tube firmly onto tyre valve; Hold the can
upright-button uppermost-remove protector cap-press button until
tyre appears firm.
4. After pumping is finished, disconnect both ends of the tube.
Immediately drive 3-5km to allow the sealer to spread in tyre and
mend the puncture. Then check and adjust tyre pressure.
1. It is just for emergency use. Repair your punctured tire with
Rubber Patch at your earliest possibility.
2. Keep away from heat, flame, spark and other source of ignition.
3. Store in a cool, dry place (45℃); Avoid direct sunlight.
4. Do not clash, puncture, or incinerate the can.
5. Keep out of reach of children;
∮65mm x 158mm H
450ml x 12pcs/ctn
20ft Container Loading